Mechanic First Class

Mechanic First Class

Location: Houston, TX, US, 77029

Function: Manufacturing

Audience: Hourly

Work Arrangement: On Site

Maintenance Mechanic 1st Class

The purpose of the Maintenance Mechanic 1st Class is to perform as professional, highly skilled, and exceptionally competent maintenance person. Participates in teams to develop and implement solutions.

Principal Duties and Responsibilities:

Plant and Environmental Safety

• Lives the Owens Corning Safety Stand and meets all safety requirements. Safety is a condition of employment.
• Take personal ownership to work safely and hold other team members to the same high standards of safety
• Notify supervisor immediately of any accident, near miss or on-the-job injury when it occurs no matter how insignificant it may seem.
• Participates in the safety, quality, autonomous maintenance, TPM and housekeeping programs as established within the plant; including but not limited to Focused Improvement Events, Safety Committee, Training, etc.
• Performs job tasks to reduce environmental impact and adheres to the environmental regulations and recycling procedures for waste disposal.
• Complies with all plant rules and safety regulations.
• Performs cleanup duties at workstations and/or equipment/machinery.
• Communicates safety concerns and/or equipment problems/abnormalities to appropriate personnel, maintaining strong communication with the appropriate line section operators to ensure immediate action is taken for product out of spec.
• Inspect vehicles before use and throughout shift, keeping all equipment clean and operational.

TPM

• Participates in plant TPM initiatives - completing activities associated with TPM tasks (adheres to CILT standard, 5S).
• Continues to use TPM methodology to gain a better understanding of the equipment.
• Identifies and participates proactively in learning opportunities and develops expertise in those areas.
• Utilizes Focus Improvement tools to problem solve.
• Works to achieve zero injuries, zero defects and zero losses.
• During PM days, uses time effectively to bring equipment to optimal condition for zero losses.
• Maintain DM and Step Boards.

Maintenance

• Energy Control Procedures (ECP's) and Lock Tag Try (LTT) system. Respect for the potential hazards within the manufacturing operation. Training and regular auditing of the process.
• Fluent in the language of the plant.
• Safe rigging procedures.
• Advanced PLC -- Ability to use laptop for troubleshooting and see what limit switch or photo eye isn't working and ability to adjust where needed. Internal various timers in the program; the ability to access status files to diagnose and clear PLC faults.
• Advanced Troubleshooting, how to analyze a problem and step to the root cause. Help reduce cycle time to problem resolution and eliminates the "replace and see what happens method". Ability to lead others in troubleshooting
• Process - Advanced concepts of what it takes to consistently manufacture shingles. Critical product characteristics, key process variables, customer needs etc.
• Business - World Class Manufacturing (WCM) concepts, what are they, individual and business benefits. Key business metrics and focus.
• Installs, modifies or maintains plant equipment and assists in determining appropriate methods to accomplish these tasks.
• Must work safely and follow all documented and "common sense" safety polices and procedures.
• Read, understand, and analyze blueprints and other technical data references.
• Expert use of hand and power tools.
• Inspects plant equipment to identify potential problems prior to breakdown occurrences.
• Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion.
• Follows all environmental compliance policies & programs.
• Work as instructed with outside contractors.

Mechanical

• Machining bores, keyways, drill press, grinding; lathe and mill operation.
• Ability to properly, precision align belt, gear or direct coupled shafts using proper tools to specified tolerances.
• Understanding of lubrication principles and bearing tolerances and advanced bearing physics-I.E. how does it work in terms of need for extreme care, keeping clean, etc.
• Advanced hydraulic systems understanding - hydraulic flow principles. Effects of pipe sizes and valves on pressure drops, making proper fittings per system requirements, proper valve application, etc. Applied to water systems, hot oil, and hydraulic systems.
• Same as above for compressed air and steam, (where applicable) systems.
• Advanced understanding of pump and operating characteristics including effects of suction pressures, head pressures, sealing/packing techniques.
• Ability to track conveyor belts properly and understanding the physics of belt operation and tracking including bucket elevators; belt splicing.
• Ability to read air and power fluid schematics.
• Advanced welding for all; structural and piping welding for at least one craft per plant.
• Pipefitting alignment, flange, threading.
• Advanced electrical component understanding: solenoids, motors, heaters, contacts, and photoeyes.
• Ultrasonic rotating equipment troubleshooting.

Electrical

• Advanced industrial electrical code.
• Capability to read schematics and P&ID drawings.
• Fusing, thermal overload protection, wire sizing, motor theory, etc.
• AC/DC and Servo drive system (advanced).
• Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand advanced DC motor control, etc.
• Ability to fully troubleshoot AC/DC variable frequency drive, and communicate technically with outside technical support when needed.
• Ability to fully understand the various control loops in the plant including IM/APC systems and weight control equipment.
• Fully competent in electrical noise avoidance-grounding, shielding, etc.

• Burner system understanding, troubleshooting and properly tuning

Other

• Demonstrate the ability to effectively communicate.
• Support the training and development of colleagues.
• Demonstrates flexibility to changing priorities as business needs dictate.
• Identifies and participates proactively in learning opportunities, and develops expertise in those areas.
• Follows standard operating procedures and processes.
• Can and is willing to make decisions. Knows the chain of command to get support.
• Regular Attendance on site and the ability to rotate varying shifts.
• All other duties as assigned or needed.

Skills and Abilities

• Demonstrated desire to impact safety
• Must be able to work independently or in a team atmosphere with minimal direct supervision
• Demonstrated mechanical aptitude and the ability to troubleshoot
• High attention to detail
• Demonstrated ability to multi-task
• Advanced mathematics skills
• Able to effectively communicate (read, write, speak, understand) English
• Advanced Electrical
• Advanced PLC
• Advanced Hydraulic
• Advanced Pneumatics
• Advanced Blueprint & Schematic reading
• Proficient in SAP PM Module

Computer and Software Competencies

• Work with a computer to perform advanced data entry
• Demonstrate advanced computer skills such as Microsoft Outlook, IVC and SAP.

Education and/or Experience

• High School Diploma or GED Equivalent required.
• Manufacturing or process related experience preferred.
• Preferably five (5) years in a related maintenance trade or occupation that involved electrical,